HEAVY DUTY LIFTING TABLE
QUICK DIE EXCHANGE TROLLEY
DIE LOADER FOR STORING DIES
BOLSTER EXTENSION MOBILE
Aditron heavy duty roller blocks having two bearing in each roller manufactured from solid rods not from pipes for minimum friction fixed and lapped the plates for roller blocks are 8mm to 20 mm thick suitable for dies / moulds jigs/ fixtures/ tools weight with in 40 kgs to 10000 kgs three diffrent sizes of rollers for diffrent capacities. The length of roller blocks need to be 300 mm larger than your die/ mould for safety pins etc these are also fixed on roller top trolley these are fixed like a rail track one pair for one die/ mould
NOTE – AS THESE ARE PRECISION EFFORT REQUIRED IS REDUCED TO 7–10 PERCENT OF DIE/ MOULD WEIGHT IN PUSHING AND PULLING RESULTING IN TIME SAVINGS OF 30–80 PERCENT
Aditron noida offers different sizes of die/ mould/ tools/ fixture/ jigs roller design heavy duty racks storage racks which are made to order as per size of dies / moulds/ jigs/ fixtures/ tools from 40 kgs to 10000 kgs each to be stored in single// double/ three tier racks. With a pair of roller blocks fixed like a rail track
The operator just pushes or pull out the dies / moulds/ jigs/ fixture / tools since they are placed on parallel rollers each roller having two bearings the efforrt required reduced to 7–10 percent of its weight savings in time upto 80 percent
You can save 30–80 percent of die exchange time resulting in increased production and its payback . Only one or two person are required to push or pull —as no forklift — no overhead crane required for storing
R o i depends upon no die changes per day since it is having short payback period it is worth using to reduce man power for die/ moulds/ tools/ jigs/ fixtures storage and retrieving them in shortest possible time from the rack
For v v heavy dies / moulds you may use chain pulley block on both sides if the weight is over 5000 kgs each
The sizes of racks and no of roller blocks varies application to application as per die size its weight
DIE- MOLDS- TOOLS- JIGS- FIXTURES- HEAVY JOBS– QDC – SMED- SHIFTING MADE EASY JUST PUSHING OR PULLING ON ROLLERS SAVINGS IN MAN POWER INCREASE PRODUCTION NO RUNNING COST NO MAINTENANCE PROVEN TESTED AT SHOP FLOOR- TOOL ROOM- PRODUCTION SHOP