The ADITRON DM-018 (AGI-DIP) washers represent the most effective solution to all cleaning problems when a dipping process is required.
The Aditron DM-018 washers are both manufactured with and without heating for operation at room temperature and at medium or high temperature.
The Aditron DM-018 washers are fully pneumatic and a low volume of compressed air is the only energy they need.
The series AUTOMATIC are equipped with electronic timer, pneumatic cover lifter, double electric power, temperature gauge and consol type control box.
For Larger Production 2 to 15 Aditron AGI-DIP systems can be arranged in line with manual shifting of baskets - low cost automation or mono rail automatic lifting, shifting and dipping. Also offering Ultrasonic Systems from 250 watts to 2500 watts - over 1000 equipments working. Transporter System with ultrasonics multi-stage PLC based systems also being manufactured to suit the requirements.

The ADITRON DM-020 degreasers are designed for degreasing operations by means of chlorinated or fluorinated solvents in vapour phase and are characterized by specific technical features that make them not comparable to other machines for the same process.
The Aditron DM-020 washers are also equipped with water separator and thermocouple to check the boiling point of the solvent.
The Aditron DM-020 machines can be equipped with water chiller.
For Larger Production two to six Aditron VAPODIP systems can be arranged in line with manual shifting of baskets - low cost automation. Ultrasonic Cleaning manual and automatic vapour degreasers - Ultrasonic Multi Stage cleaning systems.

The ADITRON DM-010 range of turntable spray washers represents a simple and rational answer to many cleaning problems Aditron DM-010 washers are suitable for the fast removal in one single operation of various contaminants such as oils, grease, mud etc. from small and medium size mechanical parts.

The control box contains all the instruments and relays including timer, thermostat, cut-off switch, heating and all function lamps.

The automatic models are equipped with console type electronic controls.

The door opening and closing can be manual or automatic with pneumatic cylinders at extra cost.

The ADITRON DM-012 operating principle is the same as the aditron dm-010 washers but the structure is different being totally cabined with fold type front door which acts as a load platform in open position, more liquid capacity, double heating power and the platform rotation is obtained by means of a heavy duty geared motor.

The Aditron DM-012 washers are therefore designed for heavy-duty continuos operation jobs. All actions are timer controlled automatic.

The door opening and closing can be manual or automatic with pneumatic cylinders at extra cost.

Aditron designs and manufacture one piece cleaning System for production having cleaning time within 60 seconds with loading and unloading on the same side or the other side as required for production - process.

The ADITRON spray phosphating systems upto 15 stages washers are designed for continuous operation jobs and can be single or multi stage. That makes the tunnel system suitable for many applications even if a diversified spray process is required for difficult-to-clean parts or for mass-production.
The tunnel system is based on the pass-through principle and is not influenced by the length of materials to be treated. If required first stage with Ultrasonic for derusting / pickling / soaking / rust removing.

The ADITRON 2 to 6 stage spray washing cleaning and degreasing systems - washers are designed for continuous operation jobs and can be single or multi stage. That makes the tunnel system suitable for many applications even if a diversified spray process is required for difficult-to-clean parts or for mass-production.
The tunnel system is based on the pass-through principle and is not influenced by the length of materials to be treated. If desired a dipp stage with Ultrasonics can be added for soaking application.